|
December 03, 2008 00:12 AM  BY STACEY BARRUS
|
|
|
When replacing a
home heating system, there are a lot of questions that
people have in regards to new home heating
systems. Here is a questions that was recently
asked.
Q: My 1,200
square foot home used to be heated by a furnace from 1949
that ran at 25,000 BTU. Recently I changed the system to a
newer, 7,000 BTU system. I thought this newer heater
would be more efficient, but I find that it takes much
longer to heat the house than the older system did. Is
there something wrong with my furnace or do I need one that
has a higher BTU?
A: It’s a good idea to replace old heating
systems with newer, more efficient models. These new
models can work just as well or better than old
systems, but they do work differently. Where old
furnaces could be turned on and heat the house within a
matter of minutes, new heating systems can take
longer. If you want your home to be warm at a certain
time, set the heat to go on about 45 minutes prior to that.
Another important factor is whether your home is
“weather-tight.” Make sure all doors and
windows are properly sealed. If not, you may be losing
heat at the same rate your heating system is producing it.
Check with a heating contractor who can tell you
whether the new unit is sized correctly for your
home’s square footage.
|
|
November 14, 2008 00:11 AM  BY STACEY BARRUS
|
|
|
If you’ve
been researching home
heating systems, chances are your head is
spinning right about now. It’s no wonder!
The number of types of radiant heaters available for
residences or businesses could make anyone dizzy in no time
at all. There’s really a lot of selection for
homeowners to choose from. Today we’ll discuss
the electric cable heating system kind of radiant
heaters. Electric cable heating systems are gaining
popularity in as radiant heaters and are ideal for
heating smaller areas (10-300 square feet) like
bathrooms, kitchens, and sun rooms. These systems are
comprised of a thermostat and a heating cable. On some
systems, the cable is be shipped as a large spool of
cable. These systems are oftentimes less expensive,
and give you the ability to space the cable how you want
and customize a layout that will heat every square inch of
your floor. Other systems have the cable attached to a
plastic mesh or tape to create a mat to maintain its
proper spacing.
Every available cable system is equally
effective, so when determining which radiant heater
system to purchase, you should look at the warranty of
the product, along with the ease of installation. Some
cables must be embedded in a separate layer of
concrete or mortar, whereas other systems can simply
be installed in the thinset.
Radiant Heaters Tip: When heating smaller
areas with a radiant heater, it is next to impossible
to beat the simplicity and price of an electric cable
heating system.
|
|
December 20, 2008 00:12 AM  BY STACEY BARRUS
|
|
|
Not traditionally
used in heating homes, flat panel radiant
heaters are used to heat objects via radiant heat
transfer. These radiant heaters have traditionally
been used in a variety of industries and applications,
such as space heating, drying, curing, and water
evaporation. More recently, these heating systems are also
gaining popularity in home heating applications as well.
Radiant
heaters use different types of emitter surfaces. Choices
include: quartz, high-temperature glass, stainless
steel, and ceramic tiles. These are all materials that
are easily and efficiently used in home applications
such as flooring, countertops, and towel racks. Because
these items are easily turned into emitter surfaces for
radiant heat, they can easily and beautifully be
incorporated into home heating applications such as
heated floors, walls, and towel racks.
To find out about radiant heaters for your home,
check with the folks at warmzone.com. They have a
complete product catalog of radiant heating solutions
that can accommodate almost any application or budget.
Radiant Heaters Tip: radiant heaters a
great way to efficiently heat a home, while maximizing
your home’s beauty, but they are very cost
effective and easy to install.
|
|
December 12, 2008 00:12 AM  BY STACEY BARRUS
|
|
If you’ve ever stayed in a fancy hotel
and felt the warm tile beneath your feet
you’ve probably wondered how they heat the
tile.Well, it’s actually pretty simple
using radiant
heaters. Radiant heaters are economical, and easy to
install.This is how they work.
When a radiant heat system is
switched on, energy is forced through a
conductive material to create resistance or heat.
Majority of the time an electronic line-voltage
system is used. This system uses a special
thermostat that has an integrated GFCI breaker for
safety.
Dry radiant floor systems
allow even heating throughout the entire floor.
The heat radiates from the floor and warms objects near
the floor as opposed to forced hot air that
tends to rise to the ceiling. Radiant
heaters heat while reducing dust, draft, and noise
problems associated with forced air systems.
They can be more aesthetically pleasing than
other forms of heating because there are no heat
registers or radiators to obstruct interior designs.
Manufacturers claim radiant floor heating saves
20 to 40 percent on monthly heating bills as
compared to the other heating appliances.
Mostly the radiant heat panels are attracted to the sub
floor using approximately 10 screws per panel.
Manufacturer recommendations include screwing and
fastening adhesive when installing the panel. An
electrometric bonding material is placed in the grooves
prior to tube installation. The tube is pressed into
the groove flush with the surface of the panel. Though
the installation does not take much time, you may want
to consult the professionals at warmzone.com if
you’re considering installing your own radiant
heating system.
|
|
December 25, 2008 00:12 AM  BY STACEY BARRUS
|
|
For anyone who is looking for a great way to
save energy, and maximize comfort, then radiant
heaters may be the ideal solution. Installing radiant
heaters in a home under construction or in an
existing home is proven to cut heating costs. It
works by putting water lines in the
home’s concrete floors or under existing floors
and running hot water through them. Radiant
heaters help to keep the whole house at a more
constant temperature. In this way, our regular heaters
don’t have to do as much to keep things
warm and toasty during the winter.
You’ll find that
switching to Radiant
heaters will not only help save energy and lower
heating costs, but it will certainly add to
comfort as well. That is because it put the heat
at our feet, which are generally cold, and offers cooler
air near head level, where we are generally a
little warmer.
Many times, what first springs
to mind when people think of eco-friendly energy
and heating is solar power. While solar panels are
expensive, there are other eco-friendly ways to cut your
power bill. In fact, energy savings can be found
right beneath your feet:
radiant
heaters.
Radiant Heaters Tip: It is reported that
many people waste a lot of energy by not sealing
cracks, doors and windows; checking to make sure a
home’s insulation is in good shape and replacing it
if it’s not is another good way to stop energy
waste.
|
|
December 14, 2008 00:12 AM  BY STACEY BARRUS
|
|
|
If you’re
in the market for a new home heating solution, you may be
wondering what kinds of home heating choices are there? A
majority of homeowners are probably most familiar with
forced air unit heaters and might not realize that
there are other options for heating a home – other
options that are more efficient and even more comfortable.
One such option are radiant
heaters, which, as opposed to warm air systems, delivers
the source of heat to the floor level, not the ceiling.
Radiant
heaters or radiant energy is the oldest form of heating
used to provide comfort and is the basis for all
heating systems. Radiant energy is totally pure
radiation and is absorbed by an object without physical
contact with the heat source or by heating the surrounding
air, as is the case with convective, forced air
systems. Believe it or not, under-the-floor heaters
were first used by the Romans. While under floor
heating was initially reserved for the rich, it eventually
became increasingly commonplace in public buildings
and villas. This form of radiant heating was used
particularly in the colder regions of the Roman
Empire. The Roman system was based on hypocausts, comprising
ducts that underlay the floor (itself built on raised
brick piles) and flues that were built into walls. Hot
air or steam from fires circulated up through this
system, warming the floor and walls, with heat passing into
the rooms. Radiant Heaters Tip: Health
experts agree that radiant heaters can help in
eliminating dust mites that live in our homes, and since
dust mites love a warm moist environment, towel
heaters aid in maintaining a consistent room
temperature and keep it moisture free.
|
|
December 11, 2008 00:12 AM  BY STACEY BARRUS
|
|
In today’s housing market, it’s
not a bad idea to add value to your home in new
and innovative ways.For example, don’t
just think about renovating a bathroom, consider
using radiant
heaters to warm towel racks in the bathroom, or a
heated floor.Can you think of anything
cozier on a chilly winter morning than toasty
toes when you step out of the shower?
Not only is radiant heating is
one of the most comfortable ways to heat your
home, but radiant heaters also offer a surprisingly wide
diversity of applications. Radiant
heaters can be used in a number of applications,
including in tiled areas, hardwood flooring,
carpeted areas, cement floors, basements, and
garages. You see, radiant
heaters are a type of heater that warms objects
instead of air. Radiant heat uses objects, such
as the floor, to heat a home. The air in the
room is warmed when it comes into contact with the
warmed objects. Heat loss is reduced and the
radiant heat remains in the lower part of the
room, warmer near feet level and slightly less so at
head level, creating the perfect climate for
comfort.
Radiant Heaters Tip:
whether you’re building a new home or
updating your current home, you owe it to yourself to
check out the comfort that radiant heat has to offer.
|
|
November 17, 2008 00:11 AM  BY STACEY BARRUS
|
|
Volatile, skyrocketing, and record high fuel
costs provide reasons aplenty for so many people
to turn to Warmzone.com for guidance in finding
the best-possible radiant heating
system for their needs. Consumers are finding
themselves backed into a corner and are looking
for an efficient, comfortable, and practical
alternative. With our commitment to researching the best
options for radiant heat and assessing each job
individually, our research and design team is
prepared to design each project with the ideal
heating
system to meet the needs of our customers at the
best available prices.
Efficiency is high because radiant heat raises
the surface temperature of what it is warming,
thereby providing comfort at a lower room-air
temperature than other systems Radiant heating
systems provide uniform heat and has a comparatively
low cost of operation - up to 30% less than
conventional systems in most residences.
Heating Systems Tip:
With new advances in technology snow melting heating
systems for driveways, sidewalks, and patios are more
affordable, and economical than you might assume.
|
|
December 24, 2008 00:12 AM  BY STACEY BARRUS
|
|
You may not know that radiant
heaters for your home or business come in a variety
of forms – all efficient and providing
reliable, cozy warmth. Today we’re going to
discuss one form of radiant heaters: hydronic floor
heating.
Quite a name, isn’t it?
Hydronic floor heating is the oldest and most
popular type of radiant floor heating. These systems are
comprised of a boiler or hot water heater,
pumps, manifolds, PEX tubing, thermostat, and
either gypcrete (a concrete-like material) or wood
panels. Hydronic heating is the most complex of
all radiant
heat systems. These systems require trained
professionals to design and perform the
installation. Your best economies of scale are achieved
for hydronic systems in large areas or entire homes
because of their expensive components and
operational costs. Hydronic systems can be
installed under any type of flooring. Most hydronic
systems require hot water tubing to be installed
in a 2-4″ bed of light concrete and are
best installed during the initial construction because
of its weight load demands and adjustments to
floor height.
For heating smaller areas such
as a bathroom or kitchen, a hydronic floor
heating system may not be the best value for your
project. The complexity and cost of installing
the system, along with the long-term maintenance
and up-keep required, might not be worth the small
amount you will save in operational costs.
Radiant Heaters Tip: Many recent
developments have made hydronic systems more
convenient and possible radiant
heater solutions for major home remodeling projects.
|
|
December 24, 2008 00:12 AM  BY STACEY BARRUS
|
|
|
What a pain! If
you or anyone in your family has asthma or dust
allergies, you know all too well how miserable these
ailments can make a person. Many allergy and asthma
experts will advise certain changes in housekeeping
habits to help alleviate allergy- or asthma-causing
conditions in your home. In addition, you might consider
changing your heat source to radiant heaters.
At first glance, you might not think that
radiant heaters could be such a simple solution to
helping keep your home healthy. In reality, radiant
heaters improve the air quality, which is important,
especially for anyone who suffers from either dust
allergies or asthma. Not having to change air filters
or clean heating ducts should also cut down
dramatically on dust or other allergens in your
home’s air.
Eliminating dust mites that live in your home
would also go a long way towards helping keep your
home healthy. Since dust mites love a warm moist
environment, towel heaters and other radiant heater systems
aid in maintaining a consistent room temperature and
keep it moisture-free…and dust mite-free,
too. Furthermore, mold and mildew are also caused
from excessive moisture especially in bathrooms with
insufficient ventilation.
Radiant Heater Tip: By placing radiant
heaters or a radiant heat towel rack in the bathroom
you can combat the spread of germs for only pennies a
day.
|
|
|